" wrote:RustyClaymore 11:27 - Ah yes, Socks is the single raindrop responsible for the flood. XD
PrincessZelda wrote:I really would like a Canon Rebel, though.
Roy Mustang (post: 1301397) wrote:What I use now, since I've gone all digital.
Canon EOS 40D digital SLR
Canon EOS 20D digital SLR
Sigma 28-300mm F3.5-6.3 DG Macro len
Sigma APO 70-200mm F2.8 EX DG macro HSM len
Tamron AF17-50mm F/2.8 Di-II LD Aspherical len
Canon PowerShot A590 (I only use this for anime cons or small events, that I don't bring my good cameras)[/color][/font]
" wrote:RustyClaymore 11:27 - Ah yes, Socks is the single raindrop responsible for the flood. XD
Roy Mustang (post: 1301397) wrote:What I use now, since I've gone all digital.
Canon EOS 40D digital SLR
Canon EOS 20D digital SL
[font="Book Antiqua"][color="Red"]Col. Roy Mustang[/color][/font]
Roy Mustang (post: 1301711) wrote:If I didn't have the Canon Lens already, I would love to have the Nikon D700.
But I just wait and see what comes out next as a full frame DSLR and go from there.
[font="Book Antiqua"][color="Red"]Col. Roy Mustang[/color][/font]
Benn wrote:5D Mark II FTW.. there's some amazing stuff being made with it.
sadly there was a rumor that last week there'd be a dslr announced to bridge the gap between the 5D MarkII and the 50D... but it turned out to be just a rumor and Canon announced the T1i. Such a let down.
Roy Mustang (post: 1301674) wrote:Right.
When I have seen people use the M mode, they will bump up the ISO anywhere to ISO 800, to make the exposure bracketing set a EV 0, which is the middle. It works, but you will end up with more grain. That is one way to balance the exposure bracketing, but not the best way.
The only other way to have the exposure bracketing set close to 0 and this maybe only for non point and shoot cameras is to hold the shutter button down half way and look where the exposure bracketing is and then let go of it and hold it down again. It will reset itself sometimes lower or higher.
But this is why I don't like the fact that you can't control the exposure bracketing, because there are times that you may need bump it up, when you have low light or bump it down, when you have too much light.
Most of the time, I keep my ISO at 100 or 200. But if it a very cloudy and I don't have a lot of light, I will bump it up to ISO 400 but no more then that.
The good thing about the Canon 40D is, they have an ISO setting of 100, 125, 160, 200, 250, 320, 400 and on up to 800 and 1600.
I keep mine from anywhere from ISO 100 to ISO 400.
[font="Book Antiqua"][color="Red"]Col. Roy Mustang [/color][/font]
Warrior4Christ wrote:For night photos and indoor, I can't limit myself to just ISO 400... I don't like going to ISO 1600 because of the graininess, but I just have to. I'm hopefully getting a 35mm f/1.8 lens soon, which should help with that.
Roy Mustang (post: 1302454) wrote:What settings are you using for night photos and are you using a tripod?
[font="Book Antiqua"][font="Book Antiqua"][color="Red"]Col. Roy Mustang[/color][/font][/font]
Warrior4Christ (post: 1302525) wrote:I use aperture priority with the largest aperture. I only occasionally use a tripod, and if I do, I usually use ISO 400 or less.
Warrior4Christ wrote:I use aperture priority with the largest aperture. I only occasionally use a tripod, and if I do, I usually use ISO 400 or less.
Users browsing this forum: No registered users and 337 guests